Rotating dryer can be used for drying many kinds of materials and with convenient and reliable operation; Therefore, it has been widely used. The traditional cement rotating dryer: The traditional dryer always heats air surrounding, and transports the hot air to roller around. The humid air resulted in this procedure will be excluded out, leaving dry air to keep drying. The traditional design does not recover the heat, and is therefore very inefficient. However, the traditional design is simple, reliable, and reasonable-priced.
Steam compression limestone dryer: This is a new developing dryer, more advanced than the conventional dryer. Its working principle is not to heat through the hot air. First, the material in roller is heated to 100 C, then resulting damp and hot water steam. After water vapor escaped out of roller, it will be collected and compressed. Under the pressure of stress, water vapour liquefies and produces heat, sending the heat back to roller, by which it can achieve recycling use of heat. Dryer on this technology, with its efficiency reaching double the times of the traditional dryer, the drying time can also be reduced to that half of the traditional dryer. The Installation of dryer machine.
First, when the dryer is transported by the manufacturer to your laundry room, you must first have a routine check. You should check which type of the machine you have purchased and if there is damage in the transportation process, and if the machine can be used. You should immediately take photographs and contact with manufacturers if you find these problems. Second, before installing the dryer, you should determine the installation location of the dryer. In terms of selection of the dryer installation location, you should take into account the transport corridors, raw material turnover, inflow, and the location of the sewer inlet. Third, the dryer is a bulky laundry facility with heavy weight, so the machine should be installed on the solid foundation required to maintain the level at the same time to prevent the appropriate selection of the location and uneven from causing large vibration when the equipment is at work, which will affect the service life and the washing efficiency of the dryer. Get all the facts and insights with Horace Mann, another great source of information.